Stellar Blade Un'esclusiva PS5 che sta facendo discutere per l'eccessiva bellezza della protagonista. Vieni a parlarne su Award & Oscar!
 
Pagina precedente | 1 | Pagina successiva
Stampa | Notifica email    
Autore

Acerbis XLR tank in Domi.is it easy to install?

Ultimo Aggiornamento: 22/02/2013 02:08
OFFLINE
Post: 33
Post: 33
Registrato il: 25/12/2012
Età: 47
Sesso: Maschile
Cinquantino
14/02/2013 00:58

hello friends,i have found this acerbis tank for 80 euros(maby less).it is from XLR600.will it fit quiet easy in RD08 frame?i think it's the same with this(see picture below),but this is RD02 first series


here is the tank
OFFLINE
Post: 802
Post: 802
Registrato il: 13/02/2008
Città: TORINO
Età: 49
Sesso: Maschile
Dominatore esperto
14/02/2013 13:59

I bought the same tank some years ago and I tried to mount on RD02.

You need to enlarge the lower part of the tank, with hot air, to fit it on the frame, specially in the rear zone.

Then you need to modify the seat, if you want that fit properly (I didn't).

Honestly, I didn't like so much the design of this tank, so I sold it, but the red one is better.

Here on my bike:



[SM=x653544]




"Semina un pensiero e raccoglierai un'azione. Semina un'azione e raccoglierai un'abitudine. Semina un'abitudine e raccoglierai un carattere. Semina un carattere e raccoglierai un destino."
OFFLINE
Post: 33
Post: 33
Registrato il: 25/12/2012
Età: 47
Sesso: Maschile
Cinquantino
16/02/2013 22:42

Re:
dsmdommy, 14/2/2013 1:59 μμ:

I bought the same tank some years ago and I tried to mount on RD02.

You need to enlarge the lower part of the tank, with hot air, to fit it on the frame, specially in the rear zone.

Then you need to modify the seat, if you want that fit properly (I didn't).

Honestly, I didn't like so much the design of this tank, so I sold it, but the red one is better.





when you mean hot air you mean with hot gun?this will not harm the tank?for the seat maby i will buy a second one to modify.in picture the tank looks great(in my eyes) and seems ok with stock seat.do you have another pictures? [SM=x653544]


OFFLINE
Post: 804
Post: 804
Registrato il: 13/02/2008
Città: TORINO
Età: 49
Sesso: Maschile
Dominatore esperto
18/02/2013 09:06


yes, hot gun. It doesn't harm the tank, if you don't exceed.
I put the tank on a clamp, modify with two higher wings. I blew hot air on lower tank part and at the same time slowly I enlarged the clamp.

If you'll do this, you'll had to work bit by bit, with the hot gun e with the clamp.

When finally I put the tank on the frame, it fits right on the front rubber pins, but it was higher on the rear part (consider that the dominator frame in this point is larger than xl, xr and every other model).

then I stop my experiment because in the meanwhile I found a dominator acerbis tank ...

I should create a fixing for the tank in the rear part, modify a seat (shorten and modeled on tank) and modify the fairing panel under seat.

Here all pictures that I did, note that the seat and the fairing panel under seat were of second series dominator (1992-95)









[SM=x653544]


"Semina un pensiero e raccoglierai un'azione. Semina un'azione e raccoglierai un'abitudine. Semina un'abitudine e raccoglierai un carattere. Semina un carattere e raccoglierai un destino."
OFFLINE
Post: 36
Post: 36
Registrato il: 25/12/2012
Età: 47
Sesso: Maschile
Cinquantino
20/02/2013 02:10

Re:
looking at these pictures it seems that the first tank is shorter than yours(rear area).maby it is more near to oil cap






and these pictures looks like to be little different tanks [SM=g27833]






anyway i'll go to the store to see the tank.if i can i'll put it on my domi to see if i'll buy it.but it seems,it will need a lot of work to install.my domi is '95(S) and plastics are same as yours in pictures.
do you know if XR'S 400 tank needs same work to install?
thanks a lot for infos and fotos [SM=x653544]

Edit .i just found this acerbis tank for domi in good price.is it the right tank for my 1995 S model?



[Modificato da Dominatoras 20/02/2013 03:02]
OFFLINE
Post: 2.944
Post: 2.944
Registrato il: 30/11/2008
Città: ALPIGNANO
Età: 51
Sesso: Maschile
Mastro Dominatore
20/02/2013 14:10

[SM=x653538] [SM=x653538] [SM=x653538]
OFFLINE
Post: 810
Post: 810
Registrato il: 13/02/2008
Città: TORINO
Età: 49
Sesso: Maschile
Dominatore esperto
21/02/2013 14:36

HI Giorgos,

you're right, I didn't notice that the tanks were different! No way..

The Xr 400 tank has another kind of fixing to the frame in the front part, and you'd need to cut the original dominator supports and weld the new one in a lower position (a simple nut for each side could be good). Consider that the original one is quite little, compared with every acerbis model.

Here's a picture:



As Piergarden said, Dommy Acerbis tanks 2nd and 3rd series are the same shape, and I think that's the best choice, because has a quite good design and you don't need to modify seat and fairing!

[SM=x653544]


"Semina un pensiero e raccoglierai un'azione. Semina un'azione e raccoglierai un'abitudine. Semina un'abitudine e raccoglierai un carattere. Semina un carattere e raccoglierai un destino."
OFFLINE
Post: 37
Post: 37
Registrato il: 25/12/2012
Età: 47
Sesso: Maschile
Cinquantino
22/02/2013 02:08

Re:
Piergarden, 20/2/2013 2:10 μμ:

[SM=x653538] [SM=x653538] [SM=x653538]

bad luck,after i emailed the seller he called me while i was working.i told him to call two hours later to give me his bank number to pay him.when i called him he told me that he selled the tank.the price of the tank?80 euros [SM=x653549] [SM=x653549]
dsmdommy, 21/2/2013 2:36 μμ:

HI Giorgos,

you're right, I didn't notice that the tanks were different! No way..

The Xr 400 tank has another kind of fixing to the frame in the front part, and you'd need to cut the original dominator supports and weld the new one in a lower position (a simple nut for each side could be good). Consider that the original one is quite little, compared with every acerbis model.

Here's a picture:



As Piergarden said, Dommy Acerbis tanks 2nd and 3rd series are the same shape, and I think that's the best choice, because has a quite good design and you don't need to modify seat and fairing!

[SM=x653544]

i don't want to cut original supports because the use of my bike(including commuting) is for adventure trips and enduro paths(in winter) freeforumzone.leonardo.it/discussione.aspx?idd=10468284
next week i'll go to see the red XLR tank and if it fits quiet easy maby i will buy it.otherwise i will do patience to find something else
thanks guys for help [SM=g27811]


Amministra Discussione: | Chiudi | Sposta | Cancella | Modifica | Notifica email Pagina precedente | 1 | Pagina successiva
recenti cerca faq regolamento   www.dominator650.it

Feed | Forum | Album | Utenti | Cerca | Login | Registrati | Amministra
Crea forum gratis, gestisci la tua comunità! Iscriviti a FreeForumZone
FreeForumZone [v.6.1] - Leggendo la pagina si accettano regolamento e privacy
Tutti gli orari sono GMT+01:00. Adesso sono le 16:22. Versione: Stampabile | Mobile
Copyright © 2000-2024 FFZ srl - www.freeforumzone.com